Alvarion BreezeNET B System Manual page 124

Chapter 4 - Operation
4.2.6.2.2.2.1 Operator ESSID Option
The Operator ESSID Option enables or disables the use of Operator ESSID for
establishing association with RBs.
The default is Enable.
4.2.6.2.2.2.2 Operator ESSID
The Operator ESSID parameter defines the Operator ESSID.
Valid values: A string of up to 31 printable ASCII characters.
The default value is ESSID1.
NOTE
The Operator ESSID string is case sensitive.
4.2.6.2.2.3 Hidden ESSID Option (AU only)
The Hidden ESSID Option enables or disables the Hidden ESSID feature. When
enabled, the ESSID will not be broadcasted by the AU.
The default is Disable.
4.2.6.2.2.4 Hidden ESSID (SU only)
The Hidden ESSID submenu in the SU includes the following options:
4.2.6.2.2.4.1 Hidden ESSID Support
The Hidden ESSID Support option enables or disables the Hidden ESSID feature
in the SU.
The default is Disable.
4.2.6.2.2.4.2 Hidden ESSID Timeout
The Hidden ESSID Timeout parameter defines the time that SU will not try again
to associate with an AU that is working with Hidden ESSID if the AU rejected
Association Request sent by the SU because of wrong ESSID.
The range is from 1 to 60 minutes.
The default is 10 minutes.
4.2.6.2.2.4.3 Show Hidden ESSID Parameters
Select this option to view the current values of Hidden ESSID Support and Hidden
ESSID Timeout.
BreezeNET B 100
Menus and Parameters
System Manual