Alvarion BreezeNET B System Manual page 61

Chapter 3 - Commissioning
Parameter
Hidden ESSID Option (BU)
Hidden ESSID Support (RB)
Operator ESSID Option (BU)
Operator ESSID (BU)
Country Code Select
Sub Band Select (BU)
Frequency (BU)
User Defined Frequency Subsets
(RB)
DFS Required By Regulation (if
DFS is supported by Country Code)
Frequency Subset Definition (BU, if
DFS is supported)
DFS Detection Algorithm (for
Universal Country Code in 5.4 or 5.8
GHz band)
Transmit Power
Maximum Tx Power (RB)
Tx Control (BU)
Antenna Gain
ATPC Option
Best BU Support (RB)
Preferred BU MAC Address (RB)
Link Distance Mode (BU)
BreezeNET B
Table 3-1: Basic Parameters
Default Value
Disable
Disable
Enable
ESSID1
Depends on factory configuration
1
The lowest frequency in the
selected Sub Band
A (All)
Depends on Country Code
All frequencies
ETSI
Dependent on unit type and Sub
Band
Dependent on Sub Band
On
Depends on unit type and Sub Band
Enable
Disable
00-00-00-00-00-00 (none)
Automatic
37
Configuring Basic Parameters
Comment
Applicable only if Operator ESSID
Option is set to Enable.
Applicable only for 5.4 and 5.8 GHz
Section 3.1.2
units. See
Applicable only if more than one
Sub Band is available.
The list of frequencies is in
accordance with the Sub Band.
Applicable only if DFS is enabled
Applicable only if DFS is enabled
Transmit Power in RB cannot be
higher than the Maximum Tx Power
parameter
Maximum Tx Power cannot be
higher than the upper limit
according to the Sub Band in use.
If set to "Not Set Yet", must be
configured according to actual
value, taking into account cable's
attenuation.
Applicable only when Best BU
Support is enabled
System Manual
below.