Alvarion BreezeNET B System Manual page 188

Chapter 4 - Operation
The default values for this parameter are:
2200 for BU/RB-B14 and BU/RB-B28 units.

4032 for BU/RB-B10, BU/RB-B100 units.

4.2.6.6 Service Parameters
The Service Parameters menu enables defining user filtering, MIR parameters and
Traffic Prioritization parameters.
The Service Parameters menu includes the following parameters:
User Filtering Parameters (RB only)

MIR Parameters (RB only)

Traffic Prioritization

4.2.6.6.1 User Filtering Parameters (RB only)
The User Filtering Parameters submenu enables defining the IP addresses of user
devices authorized to access the wireless medium for security and/or control
purposes. In addition, it can be used to enable the transmission and reception of
specific protocol frames. These filtering options do not affect management frames
sent to or generated by the unit.
The User Filtering Parameters menu provides the following options:
4.2.6.6.1.1 User Filtering Option
The User Filtering Option disables or enables the User Filtering feature. The
following options are available:
Disable - no filtering.

IP Protocol Only - only IP Protocol packets pass.

User Defined Addresses Only - only IP frames from/to IP addresses included

in the User Filter Addresses list pass.
PPPoE Protocol Only - only PPPoE messages pass (Ethernet type 0x8863 and

0x8864).
The default selection is Disable.
BreezeNET B 164
Menus and Parameters
System Manual