Protecting Odu Connections; Figure 2-6: Bu/Rb-B10 Odu Pole Installation Using The Tilt Accessory, Vertical Polarization - Alvarion BreezeNET B System Manual

Chapter 2 - Installation
2.3.2.3 Pole Mounting the ODU with the Tilt Accessory

Figure 2-6: BU/RB-B10 ODU Pole Installation Using the Tilt Accessory, Vertical Polarization

To mount the ODU on a pole using the Tilt accessory:
Attach the Tilt accessory to the ODU using the two pairs of flat washers, spring
1
washers and nuts supplied in the Tilt kit.
Mount the Tilt accessory on a 1" to 4" pole using two 9/16" metal bands.
2
Release slightly the Tilt Control Screw, tilt the ODU downward/upward as
3
required, and re-tighten the screw.
2.3.3

Protecting ODU Connections

4Use appropriate sealing material to protect the connection against moisture and
humidity. Use removable sealing material, such as a tar seal, to enable future
access to the connector.
BreezeNET B 26
Installing the Outdoor Unit
System Manual