Alvarion BreezeNET B System Manual page 190

Chapter 4 - Operation
without any delay (provided overall conditions in the wireless link allow this
burst).
NOTE
RB-B10 units support asymmetric MIR settings, which means that only the aggregated throughput
(uplink + downlink) is limited. Setting either the uplink or downlink MIR to a value, will limit the other
one to a combined throughput of 10 Mbps. Consequently, when trying to increase one MIR setting,
you might have to decrease the other one first, so that the 10 Mbps aggregated limit is never
exceeded.
4.2.6.6.2.1 MIR: Downlink (RB only)
Sets the Maximum Information Rate of the downlink from the BU to the RB.
Available values are:
RB-B10: 128 to 4992 Kbps (128 to 9856 Kbps with Balanced MIR)
RB-B14: 128 to 6912 Kbps
RB-B28: 128 to 22016 Kbps
RB-B100: 128 to 107,904 Kbps.
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
The default value is:
RB-B10: 4992 Kbps
RB-B14: 6912 Kbps
RB-B28: 22016 Kbps
RB-B100: 107,904 Kbps
4.2.6.6.2.2 MIR: Uplink (RB only)
Sets the Maximum Information Rate of the uplink from the RB to the BU.
Available values are:
RB-B10: 128 to 4992 Kbps (128 to 9856 Kbps with Balanced MIR)
RB-B14: 128 to 6912 Kbps
RB-B28: 128 to 22016 Kbps
RB-B100: 128 to 107,904 Kbps.
The actual value will be the entered value rounded to the nearest multiple of 128
(N*128).
BreezeNET B 166
Menus and Parameters
System Manual