Alvarion BreezeNET B System Manual page 191

Chapter 4 - Operation
The default value is:
RB-B10: 4992 Kbps
RB-B14: 6912 Kbps
RB-B28: 22016 Kbps
RB-B100: 107,904 Kbps
4.2.6.6.2.3 Maximum Burst Duration (RB only)
Sets the maximum time for accumulating burst transmission rights according to
the Burst Duration algorithm.
Available values range from 0 to 2000 (milliseconds).
The default value is 5 (milliseconds), enabling a maximum burst of (0.005 X MIR)
Kbps after a period of inactivity of 5 milliseconds or more.
4.2.6.6.2.4 Show MIR Parameters (RB only)
Displays the current values of the MIR parameters.
4.2.6.6.3 Traffic Prioritization
Each packet that is received from the Ethernet port is placed in either the High or
Low queue, according to the Traffic Prioritization parameters. When the MIR/CIR
mechanism decides that a packet must be sent, the High priority queue will be
checked first. If the High priority queue is not empty, the first element in the
queue is forwarded to the MIR/CIR mechanism. Packets from the Low priority
queue will be forwarded only if the High queue is empty.
The prioritization of the packets is done using different classifiers:
VLAN Priority

ToS Priority: IP Precedence or DSCP

UDP and/or TCP ports

Source/destination IP address

Each one of these classifiers can be activated/deactivated. If more than one
classifier is activated, the priority of each packet will be determined by the highest
priority given to it by the active classifiers.
The Traffic Prioritization menu enables activating/deactivating each of these
classifiers, and configuring the applicable parameters for each classifier.
BreezeNET B 167
Menus and Parameters
System Manual