Figure 2-11: Connecting The Idu Com Connector And Inserting The Sealing Cap - Alvarion BreezeNET B System Manual

Chapter 2 - Installation

Figure 2-11: Connecting the IDU COM connector and inserting the Sealing Cap

4 Use appropriate sealing material to protect the connection against moisture
and humidity. Use removable sealing material, such as a tar seal, to enable
future access to the connector.
NOTE
Use high quality sealing material such as Scotch
ensure protection against dust and water.
Loop & tie the cable near the unit for strain reliefand for routing water away
5
from the unit: use additional cable strips to route the cable such that water
can accumulate on the cable bends, away from the unit.
Route the cable to the location selected for the indoor equipment.
6
Assemble a shielded RJ-45 connector with a protective cover on the indoor end
7
of the IDU-ODU cable. See Appendix ?D for instructions on preparing the
cable.
BreezeNET B
®
130C Linerless Rubber Splicing Tape from 3M to
31
Installing the Outdoor Unit
System Manual