Alvarion BreezeNET B System Manual page 79

Chapter 4 - Operation
Show Basic Configuration

Show Advanced Configuration

Show Country Dependent Parameters

Show All Parameters

4.2.2.1 Show Unit Status
The Show Unit Status menu is a read only menu that displays the current values
of the following parameters:
Unit Name: As defined in the Unit Control menu.

Unit Type: Identifies the unit's function: BU-B100, BU-B28, BU-B14, BU B10,

RB B100, RB-B28, RB-B14 or RB-B10.
Unit MAC Address: The unit's unique IEEE MAC address.

Unit Status (RB only): The current status of the RB. There are two status

options:
»
»
»
BU MAC Address (RB only): The MAC address of the BU with which the unit is

currently associated. If the unit is not associated with any BU, the address
defaults to the IEEE broadcast address, which is FF FF FF FF FF FF.
Number of Associations Since Last Reset: Displays the total number of

associations since the last reset, including duplicate associations.
Number of Rejections since Last Reset: Applicable only to BU when the

Hidden ESSID feature is enabled. Displays the number of times that any unit
BreezeNET B
SCANNING: The RB is searching for a BU with which to associate. If DFS is
enabled and the RB is currently looking for its previous BU, the BU's MAC
Address will be displayed.
ASSOCIATED: The RB is associated with a BU.
AUTHENTICATING: This is typically a temporary status. For example,
when an RB hears the beacons of a BU, tries to associate and the BU does
not respond because it does not hear the RB's packets.
55
Menus and Parameters
System Manual