Table of Contents
Advertisement
UK
Delivery check
Check the roller for any damage. Check the hydraulic hoses for cuts and squeezing damage. Check also
that the other hydraulic components have not been damaged during transport.
Check that the frame construction has not been damaged. You should also check that the roller blocks have
not been exposed to impacts, which may have damaged the roller tube or the double-sealed ball bearings.
Finally check that the transport wheel nuts are tightened and OK. Check the air pressure in the tyres:
approx. 3.8 bar/55 psi.
Instructions regarding unloading and placing.
The machine is delivered in completely mounted condition. Our specially trained driver will help with
the unloading of the machine.
The machine should be unloaded from the lorry using a tractor and the ramps as instructed by the
driver.
The machine should then be placed on level, firm ground.
Machine description
Grass-Roller is a roller for consolidation of grassland. With water in the smooth steel rollers a high
weight is achieved and with that effective consolidation which guarantees an evenly pressed
grassland. This helps achieve the highest yield from the grass and good quality clean silage without
soil, stones, spores etc. With a hydr. long finger harrow in 2 rows mounted in front of the Grass-
Roller the grass can be ripped out and dead thatch can be removed or divided into fine particles.
The Grass-Roller can be equipped with Spring-Board levelling bar or molehill bar mounted on the
long finger harrow for levelling of molehills, cow pats etc., which helps avoid ingress of soil and
foreign matter into fodder when harvested. Add a HE-VA Multi-Seeder onto the Grass-Roller and
grass or other seeds can be drilled at the same time as the consolidation. This allows complete
reseeding, and overseeding or patching in existing pastures.
Grass-Roller 6.3m /8.2m
5
13/07-2018
Advertisement
Table of Contents
