Accessories, Consumables; Technical Data; Safety Instructions - Hilti DD ST-HCL Operating Instructions Manual

3 Accessories, consumables

NOTE
The adapters listed ensure the right distance between the hole center laser pointer and the drill stand used.
Designation
Adapter
Adapter
Adapter
Laser visibility glasses

4 Technical data

Right of technical changes reserved.
Approx. range of the lines and intersection point
Accuracy at a distance of 200 mm from the base ma-
terial
Laser class
Line width at a distance of 250 mm from the base ma-
terial
Automatic power-off after approx.
Power supply
Battery life at a temperature of +20 °C
Operating temperature range
Storage temperature
Protection against dust and water spray
Weight of the laser unit with DD‑ST HCL A‑120 adapter
Weight of the laser unit with DD‑ST HCL A-150/160
adapter
Weight of the laser unit with DD‑ST HCL A-HD30 ad-
apter
Dimensions of the laser unit with DD‑ST 120 adapter
(LxWxH)
Dimensions of the laser unit with DD‑ST 150-U/ 160
adapter (LxWxH)
Dimensions of the laser unit with DD‑HD 30 adapter
(LxWxH)

5 Safety instructions

In addition to the information relevant to safety given in
each of the sections of these operating instructions, the
following points must be strictly observed at all times.
a) The tool and its ancillary equipment may present
hazards when used incorrectly by untrained per-
sonnel or when used not as directed.
b) To avoid the risk of injury, use only genuine Hilti
accessories and additional equipment.
Short designation
DD‑ST HCL A‑120
DD‑ST HCL A‑150/160
DD‑ST HCL A‑HD30
PUA 60
1 m
± 1 mm
2
1...1.5 mm
1 min
4 AA batteries
150 h
-10...+40°C (+14...+104°F)
-20...+60°C (-4...+140°F)
IP 53
As perIEC 60529
400 g
460 g
570 g
146 mm x 51 mm x 97 mm
158 mm x 52 mm x 99 mm
215 mm x 99 mm x 112 mm
c) Modification of the tool is not permissible.
d) Observe the information printed in the operat-
ing instructions concerning operation, care and
maintenance.
e) Do not render safety devices ineffective and do
not remove information and warning notices.
f) Keep laser tools out of reach of children.
g) Take the influences of the surrounding area into
account. Do not expose the tool to rain or snow
Description
For use with the DD‑ST 120 drill stand
For use with the DD‑ST 150‑U or
DD‑ST 160 drill stands
For use with the DD‑HD 30 drill stand
For improved laser beam visibility un-
der difficult lighting conditions.
en
11