Accessories, Consumables; Technical Data; Before Use - Hilti DX 76-PTR Operating Instructions Manual

4 Accessories, consumables

Designation
Hilti toolbox
Toolbox for magazine tool
Cleaning set
Hilti spray
Piston and piston brake set
Spall guard for magazine and single fastener guides
DX 76 PTR test gauge
Additional piston
Slider repair set
Cartridge type
Extra heavy
Very heavy
Heavy
Light

5 Technical data

Right of technical changes reserved.
NOTE
*for trouble-free operation.
Tool
Weight with magazine
Dimensions (L × W × H)
Magazine capacity
Contact movement
Contact pressure
Ambient operating temperature range
Maximum average fastener driving frequency*

6 Before use

NOTE
Read the operating instructions before the tool is oper-
ated for the first time.
Item number, description
DX 76 PTR KFD, large, with lockable cartridge compart-
ment
DX 76 PTR
DX 76 / 860‑ENP, Flat brush, 25 mm dia. round brush, 8
mm dia. round brush, pusher rod, cleaning cloth
X‑76‑P‑ENP‑PTR and X‑76‑P‑ENP2K‑PTR
Ordering designation
6.8/18 M black
6.8/18 M red
6.8/18 M blue
6.8/18 M green
DX 76 PTR
4.37 kg
464 mm × 104 mm × 352 mm
10 fasteners
32 mm
90...130 N
-15...+50°C
600/h
6.1 Check the tool
Check that no cartridge strip is loaded in the tool. If a
cartridge strip is present in the tool, use the cycling grip
to cycle the tool several times until the cartridge strip
projects from the tool at the cartridge strip exit and it can
be pulled out and removed from the tool.
en
23