Accessories, Consumables - Hilti TE 1000-AVR Operating Instructions Manual

the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.

3 Accessories, consumables

Designation
Dust removal module
Use the Hilti chisels or other tools listed below. With these you will achieve higher performance and longer
lifetime as the power tool and chisels have been optimized as a system.
Pointed chisels
Flat chisels
Wide-flat chisels
Flexible chisel
Scraper / flexible chisel
Pointed flat chisel
Ballast bed chisel
Shank
Tamping plate
Bushing head
Earth rod rammer
TE‑S chuck /
tool designa- Width (mm)
tion
TE‑SP SM 36
TE‑SP SM 50
TE‑SP SM 70
TE‑SP FM 36 32
TE‑SP FM 50 32
TE‑SP FM 70 32
TE‑SP 50
SPM 5/36
TE‑SP 50
SPM 5/50
TE‑SP 80
SPM 8/36
TE‑SP 80
SPM 8/50
TE‑SP 120
SPM 12/36
TE‑SP 120
SPM 12/50
TE‑S‑BSPM 150
TE‑SP‑SPMK 120
12/50
TE‑S‑SPI 50 115
TE‑S‑TT 60
TE‑S‑SS 22
TE‑S‑SS 43
TP‑STP 150 x 150
150/150
TP‑SKHM 40 40 x 40
TP‑SKHM 60 60 x 60
TP‑TKS 15 Inside ∅ 15
TP‑TKS 20 Inside ∅ 20
TP‑TKS 25 Inside ∅ 25
TE‑S‑RD ½"
TE‑S‑RD ⁵⁄₈"
Short designation
TE DRS‑B
Width in
Length (mm)
inches
360
500
700
360 1¹⁄₄
500 1¹⁄₄
700 1¹⁄₄
360 2
500 2
360 3
500 3
360 4³⁄₄
500 4³⁄₄
650 6
500 4³⁄₄
485 4¹⁄₂
600
220
430
6 x 6
1¹⁄₂ x 1¹⁄₂
2¹⁄₃ x 2¹⁄₃
Inside ∅ ¹⁄₂
Inside ∅ ⁵⁄₈
en
Length in
inches
14
20
27
14
20
27
14
20
14
20
14
20
25¹⁄₂
20
19¹⁄₈
24
9
17
17