Accessories, Consumables; Technical Data - Hilti TE 500 Operating Instructions Manual

2.12 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.13 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in
en
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.

3 Accessories, consumables

Designation
TPS Theft Protection System with Company Card,
Company Remote and TPS‑K key
Use the Hilti insert tools listed below. With these insert tools you will achieve higher performance and longer
tool life as the power tool and insert tools have been optimized as a system.
TE‑Y (SDS‑max) chuck
Pointed chisels
Flat chisels
Wide-flat chisels
Hollow chisel
Channel chisel
Mortar chisel
Flexible chisel
Bushing tool
Tamping tool
Earth rod rammer

4 Technical data

Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the power tool's type identification plate for
details of its rated voltage and rated input power.
Power tool
Rated power input
Rated current input
Mains frequency
16
Item number, description
206999, optional
Width (mm) Length (mm)
280...700
26 280...700
50...120 280...500
28 280
22...36 280
38 280
150 650
40X40 250
150X150 300
∅ 15...25 300
Width (in)
³⁄₄"
2...4¹⁄₂"
1"
⁷⁄₈...1¹⁄₂"
¹⁵⁄₁₆"
5⁷⁄₈"
5⁷⁄₈"
TE 500 / TE 500‑AVR
1,100 W
Rated voltage 100 V: 13.1 A
Rated voltage 110 V: 12.9 A
Rated voltage 120 V: 13.1 A
Rated voltage 127 V: 12.7 A
Rated voltage 220 V: 5.8 A
Rated voltage 230 V: 5.9 A
Rated voltage 240 V: 6.0 A
50...60 Hz
Length (in)
11...27"
11...27"
11...19"
11"
11"
11"
25¹⁄₂"
10"