Calling A Remote Party Using One Touch Dial - Huawei ViewPoint 8050 User Manual

Videoconferencing terminal
Table of Contents

Advertisement

LAN Mode Speed
Shows the LAN connection speed.
LAN Mode Duplex
Shows whether the LAN connection is in Full duplex or
Half duplex.
Page 4/4
Status & Info.
Host Version
DSP Version
LCD version
Camera version
AEC version
DSM version
Host Name
IP Address
MAC Address
Serial Number
Communication Status
OK
Host Version
Shows the system software version.
DSP Version
Shows the software version of the integrated video/audio
codec DSP (Digital Signal Processor).
LCD Version
Shows the software version of the display panel on the
ViewPoint 8050.
Camera Version
Shows the software version of the camera on the
ViewPoint 8050.
AEC Version
Shows the version of the acoustic echo canceller.
DSM Version
Shows the software version of DSB when the
ViewPoint 8050-DSB Dual Stream Box is installed.
Host Name
Shows the host name.
IP Address
Shows the IP address.
MAC Address
Shows the MAC address.
Serial Number
Shows the serial number of the system.
Communication Status
Shows the current communication status of the system.
56
Starting a Conference by Calling a Remote Party
4/4
Ver XX.XX
Ver XX.XX
Ver XX.XX
Ver XX.XX
Ver XX.XX
Ver XX.XX
XXXXXX
XXX.XXX.XXX.XXX
XX:XX:XX:XX:XX:XX
XXXX
Connecting
Cancel
01:25
Calling a Remote Party Using One
Touch Dial
This section describes how to call a remote party that has
been registered in the One Touch Dial list.
For information on One Touch Dial registration, see page 46.
1
Click the One Touch Dial tab for the party that you
want to call.
The One Touch Dial group is switched.
IP
Point to and click on the icon with the mouse.
2
Move the mouse cursor to the entry that you want to
call, and click "Dial".
Takanawa
Edit
Takanawa
0657896709
Jamie
XXXXXXXXXX
Marilyn
XXXXXXXXXX
Marvin
XXXXXXXXXX
IP
Point to and click on the icon with the mouse.
The selected party is called. The indication "Dialing"
appears on the display.
When the connection is established, the indication
"Communication starts!" appears.
You can now start the videoconference.
IP: 012.345.678.912
IP: 012.345.678.912

Advertisement

Table of Contents
loading

Table of Contents