Huawei ViewPoint 8050 User Manual page 39

Videoconferencing terminal
Table of Contents

Advertisement

Page 4/11
Administrator Setup
Packet Resend Request
Adaptive Rate Control
LAN Mode
OK
Right-click the mouse to display a help message.
Packet Resend Request
Selects whether or not to request to resend the packet when
a packet loss occurs during communication.
On: Requests resending a packet.
Off: Does not request resending a packet.
Adaptive Rate Control
Sets whether or not to always optimize the LAN
bandwidth.
On: Always optimizes.
Off: Disables optimization of the LAN bandwidth.
Note
This setting is enabled only when "Packet Resend
Request" is set to "Off". When "Packet Resend Request"
is set to "On", this item is always set to "On".
LAN Mode
Selects the interface type and the communication mode of
the LAN connection.
Auto Negotiation: The interface type and the
communication mode are recognized automatically.
100Mbps Full Duplex: Connects via 100BASE-TX in
full duplex mode.
100Mbps Half Duplex: Connects via 100BASE-TX in
half duplex mode.
10Mbps Full Duplex: Connects via 10BASE-T in full
duplex mode.
10Mbps Half Duplex: Connects via 10BASE-T in half
duplex mode.
4/11
On
Off
On
Off
Auto Negotiation
Cancel
IP:012.345.678.912
Page 5-8/11
Administrator Setup
TOS(Video)
IP Precedence
Low Delay
High Throughput
High Reliability
Minimum Cost
Diffserve
OK
Right-click the mouse to display a help message.
Each page allows you to configure TOS (Type of Service)
Field settings by data type.
Page 5/11: TOS (Video)
Configure TOS (Type of Service) Field settings for video
data.
Page 6/11: TOS (Audio)
Configure TOS (Type of Service) Field settings for audio
data.
Page 7/11: TOS (Presentation)
Configure TOS (Type of Service) Field settings for the
RGB data output from the Dual Stream Box.
Page 8/11: TOS (Camera Control)
Configure TOS (Type of Service) Field settings for camera
control signals.
TOS
Selects how to define the TOS (Type of Service) field for
an IP datagram.
IP Precedence: Defines the TOS field as IP Precedence.
Diffserve: Defines the TOS field as Diffserve.
Off: Does not define the TOS field.
IP Precedence
Enter the IP Precedence value (0 – 7).
Low Delay
Selects whether or not to specify the bit rate of Low Delay
for the TOS field.
On: Specifies the bit rate of Low Delay for the TOS field.
Off: Does not specify the bit rate of Low Delay for the
TOS field.
High Throughput
Selects whether or not to specify the bit rate of High
Throughput for the TOS field.
On: Specifies the bit rate of High Throughput for the TOS
field.
Off: Does not specify the bit rate of High Throughput for
the TOS field.
High Reliability
Selects whether or not to specify the bit rate of High
Reliability for the TOS field.
5/11
Off
On
Off
On
Off
On
Off
On
Off
Cancel
IP:012.345.678.912
37
Registering Local Information

Advertisement

Table of Contents
loading

Table of Contents