Network Setup Menu - Huawei ViewPoint 8050 User Manual

Audio Setup
Mic Lavel Meter
Beep Sound
Sound Effect
Dial Tone
Ringer Level
Headphone Ringer Level
PC Volume
Call Volume
Right-click the mouse to display a help message.
Beep Sound
Selects whether the beep sounds when you perform a
mouse operation.
On: Enables beep.
Off: Disables beep.
Sound Effect
Selects whether or not to output the sound when the system
starts up, a videoconference starts, or a videoconference
ends.
On: Outputs the sound.
Off: Does not output the sound.
Dial Tone
Selects whether or not to output a dial tone when you are
dialing.
On: Outputs the dial tone.
Off: Does not output the dial tone.
Ringer Level
Selects the ringer volume when you receive a call.
To disable the ringer tone, select the "Off" setting.
To use the ringer tone, select one of the following settings:
"Min", "Mid", "Loud".
Headphone Ringer Level
Use this item to select the headphone ringer volume for
incoming calls.
To disable the ringer tone, select the "Off" setting.
To use the ringer tone, select one of the following settings:
"Min", "Mid", "Loud".
PC Volume
Use this item to set the speaker/headphone volume for the
computer display.
Call Volume
Use this item to set the speaker/headphone volume for
videoconferences.
32
Registering Local Information
On Off
On Off
On Off
Min
Min
OK Cancel
IP:012.345.678.912

Network Setup Menu

Lets you make LAN related settings.
For details on the settings, consult with the network
administrator.
For details on setting up each network using LAN, see
"Setting Up the Network Configurations" on page 47.
LAN Page 1/3
LAN
LAN
DHCP Mode
Host Name
IP Address
Network Mask
Gateway Address
DNS Address
Right-click the mouse to display a help message.
DHCP Mode
Selects whether DHCP (Dynamic Host Configuration
Protocol) server is enabled or not.
Auto: The IP address and subnet mask are automatically
assigned.
In this case, confirm the assigned IP address, subnet
mask, gateway address, and DNS address in the
launcher menu or the Machine Information menu after
the LAN connection is completed.
Off: Sets "DHCP Mode" to "Off". In this case, enter the IP
address, subnet mask, gateway address, and DNS
address.
Host Name
Enter the host name.
IP Address
Enter the IP address.
Network Mask
Enter the subnet mask.
Gateway Address
Enter the default gateway address.
DNS Address
Enter the DNS (Domain Name System) address.
1/3
Auto Off
OK Cancel
IP:012.345.678.912