Indicator Names And Functions - Huawei ViewPoint 8050 User Manual

Rear view
a Rear cover
Removing this cover gives access to the connector panel.
The connecting section between the stand and the display
is also located behind the panel. You can adjust the height
of the display by changing the screw positions.
Right side view
a "Memory Stick" slot
A "Memory Stick" can be inserted here.
Connector panel
(section behind rear cover, seen from
below)
1
18
Names and Functions of Parts
1
1
2 3 4 5 6 7
a DC19.5V connector
Connect the supplied AC adapter SQ2N120W19P-01 here.
b AUDIO IN (PC sound input) jack (stereo mini
jack)
Connect this jack to the audio output of a computer
connected to the RGB IN connector.
c RGB IN connector (15-pin mini D-sub connector)
Connect the RGB output of a computer here.
d 100BASE-TX/10BASE-T port (modular port)
Use a Category 5 LAN cable to connect this port to a hub
or similar equipment.
This port is equipped with a Link/Data indicator (green)
and a 100/10 Mbps indicator (orange).
e PC port
This connector is used when the same mouse is to be used
for the ViewPoint 8050 and for a computer connected to
the RGB IN connector. Link the connector to a USB port
on the computer.
Note
Use a USB cable that is 3 m (10 ft.) or shorter.
f RS-232C port (9-pin D-sub connector)
This connector is used only for servicing the system.
g Mouse port
Connect the supplied optical mouse ViewPoint 8050-MS
here.

Indicator Names and Functions

Indicator Status
Lit green
(Power) * Lit orange
Flashing orange (1-
second cycle)
Out
Online * Flashing blue
(3 times per sec.)
Blue illumination lit
Out
Lit blue
(PC) *
Lit white
Out
Lit blue
Lit white
(Videocon-
ference) *
Out
Meaning
Power is on
Standby
Problem with fan
Power is off
Sending/receiving
Communication in
progress
Offline (no missed call) or
standby
Computer display
Videoconference display
Standby
Videoconference display
Computer display
Standby