Table of Contents
Advertisement
To conduct a video conference
Select "IP" for the line interface, enter the remote party's
IP address in the text box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
For details on the setting, see "Communication Mode
Menu" on page 33.
LAN (Connecting Through a
Gatekeeper)
Configuration example
LAN1
192.100.10.1
192.100.10.10
User alias: VP-A
User number: 100
1
Enter a name in "Host Name" under Page 1/3 of the
LAN Setup menu, set the "DHCP Mode" to "Off", and
enter the appropriate values for "IP Address",
"Network Mask", and "Gateway Address".
LAN
Right-click the mouse to display a help message.
2
Set "Gatekeeper Mode" to "On" under Page 2/11 of
the Administrator Setup menu, and enter the
appropriate values for "Gatekeeper Address", "User
Alias", and "User Number".
48
Setting Up the Network Configurations
192.100.20.1
Router
Router
Gatekeeper
192.100.10.20
192.100.20.20
User alias: VP-B
User number: 200
LAN
DHCP Mode
Auto
Host Name
VCT1
IP Address
192.100.10.10
Network Mask
255.255.255.0
Gateway Address
192.100.10.1
DNS Address
OK
Cancel
IP:192.100.10.10
Right-click the mouse to display a help message.
The setting has been configured properly if the correct
IP address appears in the launcher menu and
"Registration Confirmed" appears under
"Gatekeeper" in Page 3/4 of the Status & Info menu.
LAN2
Note
The information that appears in the launcher menu
may differ depending on the "Number Display" setting
in the Device Setup menu. You can also click the
Number Display portion and select the information to
display from a list.
To conduct a video conference
Select "IP" for the line interface, enter the user alias or user
number set by the remote party in the number entry text
box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
1/3
For details on the setting, see "Communication Mode
Off
Menu" on page 33.
LAN (Connecting Through NAT)
Connection using NAT allows one IP address to be shared
by several computers on the same LAN. This section
describes how to set up videoconferences conducted in
NAT and global IP environments.
Configuration example
192.168.10.1
192.168.10.10
Administrator Setup
Gatekeeper Mode
On
Gatekeeper Address
192.100.10.20
VP-A
User Alias
User Number
100
OK
Cancel
Internet
Router
Router
2/11
IP:192.100.10.10
210.20.20.1
210.20.20.2
(Global address)
Advertisement
Table of Contents
