Lan (Pppoe Connections) - Huawei ViewPoint 8050 User Manual

LAN
Right-click the mouse to display a help message.
3
Set "Gatekeeper Mode" to "On" under Page 2/11 of
the Administrator Setup menu, and enter the
appropriate values for "Gatekeeper Address", "User
Alias", and "User Number".
Administrator Setup
Gatekeeper Mode
Gatekeeper Address
User Alias
User Number
Right-click the mouse to display a help message.
The setting has been configured properly if the correct
IP address appears in the launcher menu and
"Registration Confirmed" appears under
"Gatekeeper" in Page 3/4 of the Status & Info menu.
Note
The information that appears in the launcher menu
may differ depending on the "Number Display" setting
in the Device Setup menu. You can also click the
Number Display portion and select the information to
display from a list.
To conduct a video conference
Select "IP" for the line interface, enter the remote party's
IP address in the text box, and dial.
You can set "IP" as the default line interface selection for
the launcher menu by setting "Line I/F" to "IP" in the Dial
settings of the Communication Mode menu.
For details on the setting, see "Communication Mode
Menu" on page 33.
50
Setting Up the Network Configurations
LAN
DHCP Mode Auto Off
Host Name
VCT1
IP Address 192.100.10.10
Network Mask 255.255.255.0
Gateway Address 192.100.10.1
DNS Address
OK Cancel
IP:192.100.10.10
2/11
On
192.100.10.20
VP-A
100
OK Cancel
IP:192.100.10.10

LAN (PPPoE Connections)

1/3
When using PPPoE, you can connect via LAN without a
router.
A modem (using bridge mode) is required when using
FLET'S ADSL.
Configuration example
B FLET'S
ONU
210.10.10.10
1
Set "PPPoE" to "On" under Page 9/11 of the
Administrator Setup menu, and enter the PPPoE user
name and PPPoE password given to you by the
provider.
If you have a fixed IP from the provider, set "Fixed IP
for PPPoE" to "On", and enter your fixed IP address
for PPPoE in "Fixed IP Address for PPPoE".
Right-click the mouse to display a help message.
The setting has been configured properly if the correct
IP address appears in the launcher menu.
Notes
• If the fixed DNS server address is specified by the
provider, set "PPPoE DNS" to "Specify", and enter
the specific addresses in "Primary DNS" and
"Secondary DNS".
• The information that appears in the launcher menu
may differ depending on the "Number Display"
setting in the Device Setup menu. You can also click
the Number Display portion and select the
information to display from a list.
2
Remote parties must configure in the same way.
Internet
Local IP
network
ONU
211.10.10.10
Administrator Setup
PPPoE
On Off
PPPoE User Name
abc@example.com
PPPoE Password 1234567890
Fixed IP for PPPoE On Off
Fixed IP Address for PPPoE 210.10.10.10
PPPoE DNS Obtain Automatically
Primary DNS
Secondary DNS
OK Cancel
9/11
IP:012.345.678.912