Huawei ViewPoint 8050 User Manual page 6

Owner's Record
The model and the serial numbers are located at the rear.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your
HUAWEI dealer regarding this product.
Model No. ViewPoint 8050 Serial No.
WARNING
Use the AC power adapter provided with this equipment as
a power supply source.
Manufacture Type No.
NaganoJRC SQ2N120W19P-01
Any other power sources may result in hazards such as a
fire.
Disconnect device of this equipment is the mains plug of
the AC adapter.
The mains plug on this equipment must be used to
disconnect mains power.
Please ensure that the socket outlet is installed near the
equipment and shall be easily accessible.
In the event of abnormal operations, disconnect the mains
plug.
NOTICE
Use the power cord set approved by the appropriate testing
organization for the specific countries where this unit is to
be used.
CAUTION for LAN port
For safety reason, do not connect the LAN port to any
network devices that might have excessive voltage.
For the customers in the USA
WARNING
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
4
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a computing
device pursuant to Subpart B of Part 15 of FCC Rules.
Disposal of the used lamp
For the customers in the USA
Lamp in this product contains mercury. Disposal of these
materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).
For the customers in Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe
The manufacturer of this product is Huawei Technologies
Co., Ltd., Administration Building, Huawei Technologies
Co., Ltd., Bantian, Longgang District, Shenzhen, 518129,
People's Republic of China.
The Authorized Representative for EMC and product
safety is Huawei Technologies Co., Ltd., Administration
Building, Huawei Technologies Co., Ltd., Bantian,
Longgang District, Shenzhen, 518129, People's Republic
of China. For any service or guarantee matters please refer
to the addresses given in separate service or guarantee
documents.
For the customers in Europe, Australia and New
Zealand
Warning
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the
user may be required to take adequate measures.
In the case that interference should occur, consult your
nearest authorized HUAWEI service facility.
This apparatus shall not be used in the residential area.