Administrator Setup Menu - Huawei ViewPoint 8050 User Manual

Videoconferencing terminal
Table of Contents

Advertisement

30fps: Receive CIF format video at a maximum rate of 30
frames per second.
Audio Mode
Select an audio compression method for reception.
Auto: Match the audio mode selected at the far-end
system.
MPEG4 Audio: Use MPEG4 compliant compression.
G.722: Use G.722 compliant compression.
G.729: Use G.729 compliant compression.
G.728: Use G.728 compliant compression.
G.711: Use G.711 compliant compression.
Note
If the far-end videoconferencing system does not support
the audio compression method selected at the ViewPoint
8050, the G.711 method will automatically be used.
LAN Bandwidth
Select the bandwidth to be used for reception.
Available settings are 64 kbps, 128 kbps, 256 kbps, 384
kbps, 512 kbps, 768 kbps, 1024 kbps, 1536 kbps, 2048
kbps, and "User Input".
Input LAN Bandwidth
When "User Input" was selected for "LAN Bandwidth",
enter the bandwidth value here.
Far End Camera Control
Select whether to enable far-end camera control.
On: Normally this setting should be selected, to allow
control of the far-end camera.
Off: Disable control of the far-end camera.
H.239 (Presentation)
Select whether to use the H.239 compliant presentation
function.
On: Enables use of the H.239 compliant presentation
function.
Off: Disables use of the H.239 compliant presentation
function.

Administrator Setup Menu

The Administrator Setup menu is used for the system
administrators. When you specify an administrator
password in this menu, that password will be required
when making changes in the setup menus (excluding the
Display Setup menu) and Phone Book. Entering the
password is also required to access the Administrator
Setup menu.
Page 1/11
Administrator Setup
Administrator Password
Phone Book Modification Password
Remote Access Passward
Web Monitor
Web Access
Save Phone Book
Load Phone Book
Create Private Phone Book
Delete Private Phone Book
Copy to Private Phone Book
Auto Dialing
OK
Right-click the mouse to display a help message.
Administrator Password
Sets a password up to ten characters long for the system
administrator.
This password will be required when saving
configurations in the setup menus (excluding the Display
Setup menu) and accessing the Administrator Setup menu
and Phone Book.
Phone Book Modification Password
Sets a password up to ten characters long for modifying the
Phone Book.
Remote Access Password
Sets a password up to ten characters long for accessing this
System from a Web browser or telnet. Accessing from a
Web browser is also enabled by entering the administrator
password.
Web Monitor
Selects whether to permit the monitoring of a
videoconference (automatic updating of JPEG images)
from a Web browser.
On: Permits the monitoring of a videoconference via a
Web browser.
Off: Prohibits the monitoring of a videoconference via a
Web browser.
Web Access
Selects whether or not to permit accessing the ViewPoint
8050 via a Web browser or Telnet.
On: Permits accessing via a Web browser or Telnet.
Off: Prohibits accessing via a Web browser or Telnet.
1/11
On
Off
On
Off
Save
Load
Create
Delete
Copy
On
Off
Cancel
IP:012.345.678.912
35
Registering Local Information

Advertisement

Table of Contents
loading

Table of Contents