Features - Huawei ViewPoint 8050 User Manual

Features

The ViewPoint 8050 Videoconferencing Terminal is a
videoconferencing system that allows natural, face-to-face
communications with a remote party by transmitting and
receiving images and sound via a LAN (Local Area
Network).
Integrated portable Videoconferencing
Terminal
All necessary elements of the system such as 17-type
wide-format display, camera equipped with digital pan/tilt
and zoom, codec, microphones and speakers are integrated
in a single compact cabinet for easy portability. The
integrated design plus VESA mount capability makes it
possible to set up a videoconference almost anywhere.
Up to 30 One Touch Dial entries
Remote parties to which you frequently connect can be
registered in the launcher menu. You can then establish a
connection simply by clicking a Dial button.
Supports worldwide standards
Full compliance with the ITU-T Recommendations
defined by the WTSC (World Telecommunications
Standardization Committee) assures easy connection with
remote parties in any country.
Supports data conferences
Use of the optional ViewPoint 8050-DSB Dual Stream
Box allows the data from a computer to be incorporated in
the presentation or to be shown using a projector.
High transmission speeds and high-
quality picture
The Videoconferencing Terminal can handle LAN
bandwidths of up to 2048 kbps.
Support for a wide range of video/audio
compression formats
The Videoconferencing Terminal supports H.264,
MPEG4, H.263+, H.263, and H.261 for video
compression, and MPEG4 Audio, G.722, G.729, G.728,
and G.711 for audio compression.
QoS (Quality of Service) function for
optimization of bandwidth and traffic
packet through network
"Packet Resend Request" and "Adaptive Rate Control"
functions incorporated, allowing solution for busy network
traffic or packet loss, which provides consistent high-
quality communication.
Easy setup and operation
The Help menu appears on the display for guidance of
operation. The menus used for the system administrator or
those for conference participants are separately displayed.
Memory Stick slot equipped
The Videoconferencing Terminal is equipped with a
Memory Stick slot, allowing the use of still images
recorded with a digital still camera and stored in the
"Memory Stick".
You can create your own phone book and One Touch Dial
icons in a "Memory Stick" as your private phone book.
The ViewPoint 8050 features "Memory Stick PRO".
Use as computer display
The display of the Videoconferencing Terminal can also
be used as a computer display.
If you receive a call from a remote party, the picture of the
remote party can be automatically displayed even while you
are using the system as a computer display.
Automatic and manual image capturing
During point-to-point communication, several still images
of the remote party are automatically captured and saved in
the memory of the Videoconferencing Terminal. You can
use these images for your Phone Book.
If a "Memory Stick" is inserted, you can manually capture
a still image of the remote party during communication by
pressing the IMAGE CAPTURE button. The manually
captured image can also be used for the Phone Book.
KIOSK Mode available
You can simplify operations and make calling with One
Touch Dial the only available operation.
15
Features