Table of Contents
Advertisement
Message
Now upgrading. Wait for a while.
Wrong password.
Check the user name or user number for
dialing is correct.
Busy line - Connection not possible.
File error.
File size error.
File decode error.
Format error.
Unknown device is connected.
Unknown network error: Try again later.
Use of the Private Phone Book is available. A "Memory Stick" containing Private Phone Book data was inserted. The Private
Use of the Private Phone Book is not
available.
Preset 1 (- 6) selected.
Registered to Preset number 1 (- 6).
The presentation screen will not be sent.
White balance adjustment will be
performed. Press the "Start" button and wait
a few moments.
Microphone is turned off.
Microphone is turned on.
Mouse detected.
No mouse is detected.
Memory Stick file decode error.
Memory Stick error.
Memory Stick file error.
Memory Stick file size error.
No Memory Stick.
Memory Stick write-protected.
There are no images recorded in the
Memory Stick.
Memory Stick full.
Memory full.
The cooling fan is malfunctioning.
Router is not supported.
Confirm the router's port settings.
The dialed party does not exist. Check that
the number is correct.
The call request has timed out.
The remote party is unable to connect.
Cannot connect because the line is busy.
The connection was canceled by the remote
party.
Connection failed.
The connection was canceled by the remote
party.
Router is not supported. (No M-SEARCH
response)
Meaning
The LCD software version is being upgraded. Do not turn power off until the
upgrade process is completed.
Enter the correct password.
Enter the correct user name and user number.
Cannot connect because remote party is busy.
There is a problem with the file.
The file size allocation is wrong.
A JPEG file could not be decoded.
The "Memory Stick" could not be formatted.
An unknown device has been connected to the mouse port.
Try dialing once more.
Phone Book function can be used.
A "Memory Stick" containing Private Phone Book data was removed. The Private
Phone Book function can no longer be used.
Camera angle and zoom has been changed to the settings stored in preset
number 1 (- 6).
Camera angle and zoom settings have been stored in preset number 1 (- 6).
The current presentation screen cannot be handled by the DSB. Set the PC
screen resolution to XGA or lower.
The white balance can be adjusted manually.
The microphone cannot be used.
The microphone can be used.
Mouse is connected to the Videoconferencing Terminal.
Mouse is not connected or connected to the PC side.
A JPEG file on the "Memory Stick" could not be decoded.
The "Memory Stick" format is different.
The "Memory Stick" file format is different, or the file is damaged.
The "Memory Stick" file size allocation is wrong.
No "Memory Stick" is inserted.
Change the position of the LOCK slider on the rear of the "Memory Stick".
No image files are stored on the Memory Stick.
There is not enough free capacity on the "Memory Stick".
The "Flash Memory" does not have enough free space.
There is a problem with the cooling fan.
Make sure that you are using a router that is supported and that the router settings
are correct.
Check the router settings.
Check the remote party's settings.
Cannot connect due to a problem with the network or the remote party not
answering within a specific time.
Check the remote party's settings.
Cannot connect because the remote party's line is busy.
Cannot connect because the remote party cancelled a call to the local site.
Check the communication settings.
Cannot connect because the call was rejected by the remote party.
Make sure that you are using a router that is supported and that the router settings
are correct.
105
On Screen Messages
Advertisement
Table of Contents
