Select A Tool - Huawei ViewPoint 8050 User Manual

Select a Tool

By clicking a tool button on the top part of the page, you
can jump to the corresponding tool page. A brief
introduction of each tool is presented below.
[Controller]
Controls the ViewPoint 8050 using the on-screen
controller.
[Dial/Disconnect]
Calls a remote party, or ends a meeting.
[Phone Book]
Displays the dial list.
Connects from the dial list.
Registers, confirms or edits the dial list.
For a private address book, the "Phone Book"
button changes to the "Private Phone Book"
button.
[Setup]
Confirms or modifies the setup.
Sends messages.
Resets the setup functions (only when "VP8050" has been
entered as the user name).
[Status & Info]
Displays the connection status, line status, or other
machine information.
Displays the "Cause Code."
Displays the "Call Log" (only when "VP8050" has been
entered as the user name).
[Monitor]
Allows you to monitor images from the ViewPoint 8050.
Note
When "Web Monitor" in the Administrator Setup menu is
set to "Off", you cannot monitor the images.
89
Select a Tool