Black Box iPATH ACR1000A-CTL-24 User Manual page 23

USB Hub Size
Select either a 13 or 7 port USB hub. This determines the number of USB devices that can be connected to a single Local.
Note: In order to access the BIOS on some host machines it is necessary to change this setting to 7 ports.
Enable Dummy Boot Keyboard
It is often necessary to have a keyboard reported at start up. This setting means that a "Virtual Keyboard" is always reported to
the USB host. It may be necessary to disable this for use with some KVM switches.
Reserved USB ports
This setting lets you set aside a specific number of USB ports (up to 8) on the local that can be made available for certain USB
devices which require a quirk setting under advanced USB features, connected to a remote.
Note: This setting can only be applied globally it is not found with individual local configurations because all remotes need to
know how many USB ports are available for the advanced USB features.
Serial port options
These allow you to match the serial configuration being used by the attached PC host.
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
23