Black Box iPATH ACR1000A-CTL-24 User Manual page 46

4.8.3 REMOTES > CONFIGURE NEW REMOTE
This page is displayed whenever a new remote is added to the network.
The IP Address 1 field, showing the IP address that has been assigned by DHCP. Before iPATH can add the device into its
database, a new IP address must be added to IP Address 1. This is the system IP address and applies equally for Agility and
Agility Dual models.
Agility dual units have a Teaming port which provides a second 1Gigabyte link port which can be used for bandwidth doubling
and/or redundancy. The IP address 2 field is for the Teaming port. In order to use the Teaming port, IP address 2 field must be
given a valid IP address. For Agility (1000) units, this field will remain blank.
4.8.4 REMOTES > ADD REMOTE GROUP OR CONFIGURE GROUP
From the View Remote Groups page, you can create a new group or configure an existing group:
• To create a new group: Click the "Add Remote Group" option.
• To configure an existing group: Click
The Add and Configure pages are similar in content.
Login Required
• No: When selected, anyone can use a remote terminal and connect to a channel. The channels/permissions displayed to this
anonymous user are those that are set for the "anonymous user" defined within the
• Inherit from global setting: When selected, the requirement for user login will be determined by the "Login Required" setting
within the Dashboard > Settings
• Yes: When selected, a user will need to login with the username and password defined in the "Users" section. They will only be
allowed to login if they have been granted permission to access devices in the remote group.
Enable Remote OSD Alerts
Determine the required setting for pop up OSD alerts: Inherit, No or Yes. The next fields are the USB settings.
Note: USB port reservation and advanced USB features will be added to future releases of the iPATH management system.
Enable Video Compatibility Check
This reads the EDID from the attached monitor and determines whether the monitor is capable of displaying the selected video
mode before connecting a channel. This prevents the remote showing a black screen and the user being locked out because a
dual link resolution has been selected to display on a single link monitor.
Force 60Hz
If enabled, the remote frame rate is held at 60Hz regardless of the video input frame rate. The Video Switching options (below)
cannot be altered when this option is enabled.
46
for a group.
page.
1.877.877.2269
Dashboard > Settings
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
page.