Black Box iPATH ACR1000A-CTL-24 User Manual page 25

4.5.6 USB SETTINGS
HID only
If enabled, allows only HID (mice and keyboards) devices to be connected to the remotes.
Disable Isochronous Endpoint Alerts
When an isochronous USB device is connected to the remote there will no longer be a warning message. Agility units do not
support isochronous devices.
Enable Isochronous Endpoint Attach
Some USB devices combine many USB devices behind a USB hub. e.g a keyboard with audio support. By enabling this option,
devices will be allowed to connect to Agility remotes, however, the isochronous part (e.g. the audio component) of the devices will
not work.
Advanced Port Features
This section allows you to determine USB port behaviour for use with certain USB devices.
The default is no reserved ports, Merging enabled and no feature code (or Quirk) set. It is recommended that these are left at the
default settings and are only changed under advice from a Black Box reseller.
For each of the four USB ports on the remote, certain rules can be applied depending upon the USB device connected.
If you have reserved USB ports on the local, you can select which USB port to use for a particular device.
You can turn off USB merging for a particular port. This will slow down switching as the USB device will be enumerated every
time that you switch.
You can also enter an advanced feature if it is necessary for your USB device. The drop down lists the feature codes for some
known USB devices. Otherwise please contact your local Black Box reseller for advice.
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
25