Black Box iPATH ACR1000A-CTL-24 User Manual page 44

4.8.2 REMOTES > CONFIGURE REMOTE
From the View Remotes page, you can configure details for a remote:
• Click for a remote.
Note: If the IP address of the remote is changed, the device will need to reboot itself.
Device ID / Type - Identity of the remote.
Device Name, Description and Location
These are all useful ways for you to identify the remote and its origins. A consistent naming and description policy is particularly
useful in large installations.
Main/Backup Firmware - The current firmware versions contained within the unit.
Online? - Current status.
MAC Address / 2 - Lists the fixed network identifiers for the single or double ports.
IP Address / 2 - Lists the single or dual IP addresses for the unit. If the DHCP options are ticked then the fields will be grayed
out.
Allow Local Feed through - When selected, allows the remote to connect directly to a local source. The remote must have a
free interface, i.e. no IP address.
Login Required
• No: When selected, anyone can use a remote terminal and connect to a channel. The channels/permissions displayed to this
anonymous user are those that are set for the "anonymous user" that is defined within the
• Inherit from Remote Groups: When selected, the requirement for user login will be determined by the "Login Required" settings
within the Remote Groups to which this unit belongs:
• If ANY of the remote groups (to which this remote belongs) are set as "Login Required = Yes", this remote will require login.
• If ANY of the remote groups (to which this remote belongs) are set as "Login Required = Inherit..." and the global setting is
"login required = yes", then this remote will require login.
• If ALL remote groups (to which this remote belongs) are set as "Login Required = No", then this remote will NOT require
login.
• Yes: When selected, a user will need to login with the username and password defined in the "Users" section. They will only be
allowed to login if they have been granted permission to access that particular remote.
Remote OSD Alerts
Determine the required setting for pop up OSD alerts: Inherit, No or Yes.
Show Current Channel
When selected, shows the currently connected channel as an overlay.
Keyboard Country
Select the country code of the keyboard connected to the remote.
Audio Input Type
Select the required audio input type.
44
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
Dashboard > Settings page.