Black Box iPATH ACR1000A-CTL-24 User Manual page 20

4.5.2 DASHBOARD > SETTINGS
Click the Settings option below the Dashboard tab.
The Settings section contains global configuration options for the iPATH system and is divided into eight pages, each accessible
by clicking the relevant button located below the blue options bar:
General • Locals • Remotes • Servers • Network • Time • Mail • Active Directory
For configuration options that affect individual remotes, users channels, etc., see the sections dealing with those tabs.
4.5.3 DASHBOARD > SETTINGS > GENERAL
Remote OSD Timeout
Determines the time period of inactivity within the OSD after which a standard user will be automatically logged out.
iPATH Administrator Timeout
Determines the time period of inactivity within the iPATH config pages after which an admin user will be automatically logged
out.
Anonymous User
Determines which user is shown in the log when a remote is set to 'No login required'.
Disable password Reset
This prevents the password reset button from appearing on the login page.
Hide Dormant Devices
If enabled, devices that have been offline for more than 24 hours will be hidden.
Grant All Users Private Access
Determines whether a user can connect to a channel privately and thus prevent any other users from simultaneously connecting to that
channel. If not set, users can only connect in Video-Only mode or Shared mode. Settings that are applied specifically to a user will override
settings applied to user groups they're in, which in turn override this global setting.
Note: If a user has Private Access mode granted or NOT granted at user level, then it doesn't matter what settings there are above
(usergroups or global).
• If a user is set to inherit "Allow Private?" mode from their user groups, if any one of their user groups has "Allow Private?" mode
granted, then the user will have it granted, even if the rest of the user's usergroups have private mode not granted.
• If a user is set to inherit "Allow Private?" mode from their user groups, and one of the user groups is set to inherit from the
global setting - if that global setting is "Allow Private?" mode, then effectively the user group is "Allow Private?" mode so the
user will be allowed private mode.
Grant All Users Remote OSD Access
If enabled, allows remotes to be switched remotely from another remote's OSD menu.
Grant all users Force Disconnect
If enabled, permits any user logged in at a remote to disconnect a channel or preset established on that remote by another user.
20
1.877.877.2269 BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269