Factory Restore - HMS Anybus Wireless Bridge II Startup Manual

Configuration
3.3

Factory Restore

Any one of these actions will restore the factory default settings:
• Holding MODE pressed for >10 seconds and then releasing it
• Executing Easy Config Mode 2
• Clicking on Factory Restore on the System Settings page
• Issuing the AT command AT&F and then restarting the unit
Default Network Settings
IP Assignment
IP Address
Subnet Mask
Default Gateway
Default WLAN Settings
Operating Mode
Channel Bands
Authentication Mode
Channel
Bridge Mode
Default Bluetooth Settings
Operating Mode
Local Name
Security Mode
Default System Settings
Password
Anybus ® Wireless Bridge II
Static
192.168.0.99
255.255.255.0
192.168.0.99
Client
2.4 GHz & 5 GHz
WPA/WPA2–PSK
Auto
Layer 3 IP forward
PANU (Client)
[generated from MAC address]
Just works
[empty]
Setting a secure password for the unit is strongly recommended.
™ Startup Guide SCM-1202-013/SP2167-EN 1.7
11 (16)