Unitronics UMI-B1 UL Series Operation Manual page 96

UMI-B1 UL Series Inverter
Function
Name
code
P14.07 Reserved
P14.08 Reserved
P17 Group Monitoring function
Setting
P17.00
frequency
Output
P17.01
frequency
Ramp
P17.02 reference
frequency
Output
P17.03
voltage
Output
P17.04
current
Motor
P17.05
speed
Torque
P17.06
current
Magnetize
P17.07
d current
Motor
P17.08
power
P17.09
Output
Detailed instruction of parameters
responds to the reading command of the
upper monitor. The communication efficiency
can be increased in this mode.
LED tens: (reserved)
0: Communication encrypting is invalid
1: Communication encrypting is valid
Display current set frequency of the inverter
Range: 0.00Hz–P00.03
Display current output frequency of the
inverter
Range: 0.00Hz–P00.03
Display current ramp reference frequency of
the inverter
Range: 0.00Hz–P00.03
Display current output voltage of the inverter
Range: 0–1200V
Display current output current of the inverter
Range: 0.0–5000.0A
Display the rotation speed of the motor.
Range: 0–65535RPM
Display current torque current of the inverter
Range: 0.0–5000.0A
Display current magnetized current of the
inverter
Range: 0.0–5000.0A
Display current power of the motor.
Setting range: -300.0%–300.0%
(the rated current of the motor)
Display the current output torque of the
94
Function parameters
Default
Modify
value
●
●
●
●
●
●
●
●
●
●
●
●