Unitronics UMI-B1 UL Series Operation Manual page 64

UMI-B1 UL Series Inverter
Function
Name
code
Correspon
ding AO2
P06.25 output to
the upper
limit
AO2
P06.26 output filter
time
P07 Group Human-Machine Interface
User's
P07.00
password
Parameter
P07.01
copy
Detailed instruction of parameters
0–65535
The password protection will be valid when
setting any non-zero number.
00000: Clear the previous user's password,
and make the password protection invalid.
After the user's password becomes valid, if
the password is incorrect, users cannot enter
the parameter menu. Only correct password
can make the user check or modify the
parameters. Remember all users' passwords.
Retreat editing state of the function codes
and the password protection will become
valid in 1 minute. If the password is available,
press PRG/ESC to enter into the editing state
of the function codes, and then "0.0.0.0.0" will
be displayed. Unless input right password,
the operator can not enter into it.
Note: Restoring to the default value can clear
the password, use it with caution.
0: No operation
1: Upload the local function parameter to the
keypad
2: Download the keypad function parameter
to local address (including the motor
parameters)
3: Download the keypad function parameter
to local address (excluding the motor
parameter of P02 and P12 group)
4: Download the keypad function parameters
to local address (only for the motor parameter
62
Function parameters
Default
Modify
value
○
10.00V
○
0.000s
○
0
◎
0