Unitronics UMI-B1 UL Series Operation Manual page 47

UMI-B1 UL Series Inverter
Function
Name
code
Setting
source of
forward
rotation
P03.14
upper-limit
frequency
in torque
control
Setting
source of
reverse
rotation
P03.15
upper-limit
frequency
in torque
control
Torque
control
forward
rotation
P03.16 upper-limit
frequency
keypad
defined
value
Torque
control
reverse
rotation
P03.17 upper-limit
frequency
keypad
defined
value
Upper-limit
setting of
P03.18
electromoti
on torque
Detailed instruction of parameters
0: keypad setting upper-limit frequency
(P03.16 sets P03.14, P03.17 sets P03.15)
1: Analog AI1 setting upper-limit frequency
2: Analog AI2 setting upper-limit frequency
3: Analog AI3 setting upper-limit frequency
4: Pulse frequency HDI setting upper-limit
frequency
5: Multi-step setting upper-limit frequency
6: MODBUS communication setting
upper-limit frequency
7–9: Reserved
Note: setting method 1–9, 100% corresponds
to the maximum frequency
This function is used to set the upper limit of
the frequency. P03.16 sets the value of
P03.14; P03.17 sets the value of P03.15.
Setting range: 0.00 Hz–P00.03 (the Max.
output frequency)
This function code is used to select the
electromotion and braking torque upper-limit
setting source selection.
0: Keypad setting upper-limit frequency
45
Function parameters
Default
Modify
value
○
0
○
0
○
60.00 Hz
○
60.00 Hz
○
0