Odd Number Of Columns; Height Dimension; Language - stertil-KONI ST1075-FBF Installation, Operation And Maintanance Instructions

7
The screen shows the messages <Warning 15> and <Height guard is off>. There
is also an acoustic signal when raising or lowering to alert the operator to the fact
that this servicing operation is enabled.
Note
n
This setting is active for 2 minutes and the height difference guard is then
automatically switched back <ON> again. The height difference guard can be
switched back <ON> again from the service menu. This setting is not stored in
memory, so height monitoring is always switched <ON> after the system is switched
off and on again.

7.3.6 Odd number of columns

This option allows odd numbers of columns to be accepted too. By default, <Odd
number of columns> is <OFF>.
This helps avoid situations where a column is not properly registered or missed out
accidentally while columns are being linked.
This setting can only be switched <ON> in specific cases and when expressly
requested by the customer.

7.3.7 Height dimension

This setting can modify how the height is read on the screen.
You can choose between centimeters <cm> or inches <">.

7.3.8 Language

This setting allows the language used on the screen to be selected. There is a
choice of:
Table 7.1 Language settings
Setting
NED
ENG
DEU
FRA
ESP
POL
POR
ITA
Operating instructions (Version 0)
Service and troubleshooting
Language
Dutch
English
German
French
Spanish
Polish
Portugese
Italian
53 ST 1075