Specifications; General - stertil-KONI ST1075-FBF Installation, Operation And Maintanance Instructions

3

Specifications

3.1

General

The general specifications are also printed on the type plate on the mobile column
lift.
Table 3.1 Specifications
Model
Lifting capacity
Pressure relief valve
Maximum lifting height
Electric power rating
Mains power
(battery charger)
Motor
Charging current
Charger type
Charging time when
70% discharged
Number of complete lifting actions
(fully charged batteries)
Main fuse 24VDC
Control voltage
Raising/lowering time
Noise level
Installation
Weight
Maximum distance between two column
lifts
Maximum floor surface pressure
Maximum floor loading
Operating temperature
Operating instructions (Version 0)
ST 1075-FBF
16,500 lbs
3,800 psi (sealed with plastic cap ex-
works)
69"
4HP
115 VAC / 60Hz/7A
230 VAC / 50Hz/3A
24VDC 130Amps
24VDC/10,5A (20 min) /
24VDC/6,25A (continuous)
Automatic charger; can remain
connected during use and in storage.
9 hours
22 (fully loaded)
33 (half loaded)
200A (slow-blow)
24VDC
75 / 55 s
Max. 73 dB(A)
Inside
1250 lbs
approx. 29' - 6"
7500 psi
(per front wheel)
6300 lbs
(per front wheel)
0
5 to 122 F
22
3
ST 1075