Lifting Capacity; Lifting System - stertil-KONI ST1075-FBF Installation, Operation And Maintanance Instructions

3
3.2

Lifting capacity

See Table 3.1
safeguard in the hydraulic unit has been preset so that the lift can never raise more
than the specified weight +10%.
The design is calculated for a maximum load of 16,500 lbs on any one column.
3.3

Lifting system

This mobile column lift is an electrically driven hydraulic column lift for lifting heavy
vehicles. A minimum of two column lifts is needed to lift a vehicle. The number of
column lifts required depends on the weight of the vehicle and the number of axles.
Four lifting columns are normally used. The columns are all identical.
1. Column
2. Potentiometer
3. Locking pawl
4. Hydraulic unit
5. Control box
6. Electrical connector
Figure 3.1 Main components of a mobile column lift
The columns have an integrated power supply (batteries with charger).
Operating instructions (Version 0)
Specifications
for specifications of the maximum lifting capacity. The overpressure
7. Main switch
8. Automatic battery charger
9. 200A fuse holder
10.Batteries
11.Pallet lifting mechanism
12.Guide block
23
13.Lifting fork
14.Wheel adapter (option)
15.Cylinder
16.Fixed wheels
ST 1075