10.16 Example configuration: Indirect activation via the PLC
10.16.1 Task
• Reading of a 15-digit Code 128
• Indirect activation of the BCL
Code sample
Code 128, 15 digits
Profibus Inside
10.16.2 Procedure
Hardware, connections
The following connections must have been established:
• Voltage supply (PWR)
• PROFIBUS In
• PROFIBUS termination
Required modules
Include the following modules in your project:
• Module 10 – Activations
• Module 24 – Decoding result 16 bytes
Parameter settings
In the standard parameter set (device parameters), only code 128 with 0 ... 63 digits must
be activated.
Leuze electronic
Commissioning and configuration
304i
via the PLC
BCL
304i
157