Table of Contents
Advertisement
Audio
The Volume option sets the audio level of the input video, which can be viewed visually on the
TLM-170V by enabling the Embedded Audio Level Meter.
Note: If the monitor is in SDI mode, you will see 16 channels; in HDMI mode, there will only be 2
channels.
System
In the System sub menu, you will be able to do the following:
1. Change the language of the OSD menu
2. Enable cross conversion
3. Turn on the color bar
4. Set the OSD ON time
5. Flip the image
6. Select color calibration
7. Switch the standby power mode
8. Reset the entire device's settings
Language
Switch between Chinese and English.
Cross Conversion
HDMI/SDI Convert once enabled allows the HDMI Input to be delivered to the SDI Output or the
SDI Input to be delivered to the HDMI Output.
27
Advertisement
Table of Contents
