Note: Once the HDMI/SDI Convert is disabled, the input will be delivered to its corresponding
output interface. Therefore the HDMI IN video will only be shown on the monitor connected to
the HDMI OUT and the SDI IN video will only be shown on the monitor connected to the SDI OUT.
Color Bar
Available options are listed as follows:
OFF: disables the color bar
75% or 100% color bar
OSD Timer
This sets the OSD's ON time; the OSD menu will be automatically turned off after the timer times
out.
10s
20s
30s
Image Flip
The Image Flip allows viewing of the image in different orientations. Selection of V mode turns the
image upside down. The H mode flips the image laterally. To enable the vertical and horizontal
image flip at the same time, simply select the H/V mode.
The diagrams below provide illustrations of the orientations described above.
Image Flip OFF
28
V Mode