Audio; Volume And Level Meter; Audio Vector; Audio Vector Ch (Hdmi) - Datavideo TLM-170K Instruction Manual

Audio

Volume and Level Meter

The Volume option sets the audio level of the input video, which can be viewed visually on the
TLM-170K by enabling the Embedded Audio Level Meter.
Note: If the monitor is in SDI mode, you will see 16 SDI embedded audio channels; in HDMI
mode, there will be 8 HDMI embedded audio channels.

Audio Vector

Enable the audio vector scope shown below to view the audio information.

Audio Vector CH (HDMI)

First enable the audio vector scope, then select an audio input channel pair to view the audio
information.

Audio Vector CH (SDI)

First enable the audio vector scope, then select an audio input channel pair to view the audio
information.

Audio Left Out

Assign an audio channel to the left audio output channel.
31