Menu Options; Picture; Audio; Function - Datavideo TLM-702HD Instruction Manual

Menu Options

Picture

- Press the button once to display the Picture setting menu.
MENU
- Press the button to highlight the Brightness setting.
ENTER
- Press the or
UP DOWN
- Press button to select the Brightness setting.
ENTER
- Press the or
UP DOWN
- Press button again to save and return to the Picture setting menu; now highlight another
ENTER
Picture setting to be adjusted. To select a different setting (Contrast, Saturation, Tint, Color
Temp*) use the
- Keep pressing the
MENU
- Press the button to exit the menu mode.
SOURCE
* NOTE: Colour Temp can be set to 9300, 7500, 6500, 5400 or User RGB values

Audio

- Press the button twice to display the Audio setting menu.
MENU
- Press the button to highlight the Indicator setting.
ENTER
- Press the button again to toggle the on screen audio indicator ON/OFF.
ENTER
- Keep pressing the
MENU
- Press the button to exit the menu mode.
SOURCE

Function.

button three times to display the Function. Settings menu.
- Press the
MENU
button to highlight the Center Mark setting.
- Press the
ENTER
- Press the button to toggle the on screen Center Mark ON/OFF.
ENTER
- Press the or
UP DOWN
- Keep pressing the
ENTER
- Press the or
UP DOWN
Screen, Cinema Zone) use the
Follow the same procedure to set the next setting.
- Keep pressing the
MENU
- Press the button to exit the menu mode.
SOURCE

Setup

button four times to display the Setup setting menu.
- Press the
MENU
- Press the button to highlight the OSD Timer setting.
ENTER
NB: OSD Timer sets how long the setting menus will stay on screen.
- Press the button again to display the OSD Timer setting position.
ENTER
- Press the or
UP DOWN
- Press button to save the OSD value.
ENTER
- Press the or
UP DOWN
NB: OSD Blending sets how transparent the setting menus will be on screen.
button to highlight the setting that needs to be adjusted.
button to adjust the Brightness value between 0 and 100.
/ buttons. Follow the same procedure to set the other values.
UP DOWN
button to cycle through the main menu options.
button to cycle through the main menu options.
button to highlight the Safety Zone setting.
button to cycle through the values 80%, 90% or OFF.
button to exit the Safety Zone setting. To select a different setting (4:3
or
UP DOWN
button to cycle through the main menu options.
button to set the OSD value between 5 to 60 SEC.
button to highlight the OSD Blending setting.
buttons.
10