Table of Contents
Advertisement
In H/V delay mode, both horizontal and vertical syncs are delayed, resulting in both horizontal and
vertical blanking periods being shown on the screen.
Note: H/V Delay is disabled if the scan mode is set to pixel to pixel.
Check Field
The check field function offers the user Red-Only, Green-Only and Blue-Only modes for screen
calibration should you require them.
First turn on the color bar, then turn on the single color mode in the check field as this allows you
to do the screen calibration by adjusting the brightness, contrast, saturation, tint and sharpness
Zoom
The zoom function allows you to enlarge the image by a certain percentage (10 – 90%).
Note: Zoom control is disabled if the scan mode is set to pixel to pixel.
Freeze
The monitor's screen freezes once enabled.
DSLR
This option is useful if Canon 5D2 or 5D3 cameras are connected to the TLM-170V.
Waveform
The TLM-170V also allows the user to display the image alongside with different monitoring
waveforms such as the waveform, vector scope, histogram and audio level meter.
Image quality can be improved using tools such as peaking filter, false color and zebras.
21
Advertisement
Table of Contents
