4.
Color Management System – Calibration Process
This Chapter will introduce the use of Lightillusion's CMS software for color correction. Before
starting the calibration process, you need to install and register the CMS software first. Connect the
calibration device to the PC or the laptop then install its driver. After the calibration environment has
been properly set up, follow the steps below to start color calibrating your monitor.
1. Open CMS software
Double click the CMS software icon to open the CMS software.
2. Select the connected "Probe"
Color calibration devices supported by the CMS are listed in the drop-down menu of "Tools
Discoverable Probes". Select the color calibration device that is connected to the PC or the laptop.
Also, deselect the device that you do not need (click the selected device again to cancel).
30