MENU Button
Press the MENU button to open the OSD menu. Once in the OSD
menu, press the MENU button to make a selection.
Audio Volume Adjustment Buttons
Once in the OSD menu, navigate the menu or increase/decrease
parameter values using the audio volume adjustment buttons.
While NOT in the OSD menu, pressing either one of the audio
volume adjustment buttons will open a Volume slide bar at the
bottom of the screen. Then press the MENU button to switch to
other setting options as listed below:
Volume
Brightness
Contrast
Saturation
Tint
Sharpness
Exit
To adjust the parameter values, simply press the Vol- arrow
button to decrease the value and the Vol+ arrow button to
increase the value.
EXIT Button
Return/Exit button
F1 – F4 Shortcut Keys
Press the F1-F4 shortcut keys to access the corresponding
function setting menus. The default function setting menus are
shown as follows:
F1: Scan
F2: Waveform
F3: Aspect
F4: Aspect Marker
Customization of Button Functions
The user is allowed to customize or re-assign function setting
menus to the F1-F4 shortcut keys. The customization steps are
outlined as follows:
1. First press and hold one of the shortcut keys (F1-F4) for
approximately 3-5 seconds until a pop-up function list appears on
the monitor.
2. Press the left and right arrow keys of the audio volume
adjustment buttons to move between options in the pop-up
function list.
3. Press the menu button to assign the highlighted function
10