Firmware Update - Datavideo TLM-170V Instruction Manual

Datavideo usually releases new firmware containing new features or reported bug fixes from time
to time. Customers can either download the TLM-170V firmware as they wish or contact their local
dealer or reseller for assistance.
This section outlines the firmware upgrade process which should take approximately 20 minutes
to complete.
The existing TLM-170V settings should persist through the firmware upgrade process, which
should not be interrupted once started as this could result in a non-responsive unit.
Successful firmware upgrade on TLM-170V requires:
 Latest TLM-170V firmware version
 USB 2.0 Portable Drive
 USB A Cable
To update the TLM-170V firmware
1. Unzip / extract the supplied zipped archive or rar folder.
2. Wipe the contents of the USB 2.0 pen drive so it is empty.
3. Transfer / copy the unzipped / extracted file to the USB 2.0 pen drive; make sure the file
name is renamed to MSTFLASH.bin.
4. Plug the USB 2.0 pen drive into the USB 2.0 port labelled SERVICE on the back of the
monitor.
5. Reboot TLM-170V and the update will be automatically in progress.
6. The TLM-170V Monitor will reboot itself at the end of the process.
5.

Firmware Update

37