Section 2: Loading Label Stock And Arm Adjustment; Loading Label Stock - Primera AP550e Operator's Manual

Section 2: Loading Label Stock

2.1 Loading Label Stock

1.
2.
3.
Remove the Roll Bar and Roll Guides from the Label Applicator. The Roll Guides and Roll
Drag Arm are removable and adjustable. They are held in place magnetically.
Remove one Roll Guide and the Roll Drag Arm from the Roll Bar.
Place the label stock roll on the Roll Bar with one side against the upright of the remaining
Roll Guide. Place it on the Roll Bar with the loose end of the stock feeding over the top of the
roll (labels facing up). The Roll Bar should be oriented with the holes to the rear as shown.
Roll Guides
Roll Bar
Roll Drag Arm
holes to the rear
labels facing up
Tip! For narrow label
rolls you may need to
reverse the Roll Guides
to allow the uprights
to be placed next to the
roll. (The bottom of the
guides will face away
from the roll on each
side.)
AP550e Label Applicator 5