Table of Contents
Advertisement
Section 5: Container and Label Specifications
These specifications are provided for preliminary compatibility purposes only! Any questionable
container/label combinations should always be tested by Primera Technical Support!
Container Specifications:
Length 19 mm – 310 mm (on platform)
Width
Height 20 mm – 203 mm **
Weight 9.1 kg ***
Shape
Type
* Container may extend over both sides of platform if Container Guide is removed.
** Flat containers/bags can be labeled if a
2 cm riser is used to raise the level of the container so the Application Arm does not interfere
with the fixed metal guide on the back of the platform. The riser can be made from wood or any
other solid material and secured to the platform if desired.
*** This is a recommended maximum based on a 9.1 kg container centered on the platform.
Heavier containers and/or containers biased to the edges of the platform may work, but may
shorten the life of the platform bearings.
Label Placement (Application Area)
Labels may be placed within the back 8" [20 cm]
of any container. For example, an 18" long container that
overhangs the front of the Container Platform can only
have a label applied within the back 8" of that container
which would result in a label that is not centered on the
container.
20 AP550e Label Applicator
310 mm – 457 mm (overhanging platform)
457 mm or greater with external support of hand or other mechanism that
allows the platform to move
19 mm – 305 mm (on platform)
305 mm – 457 mm (overhanging one side of platform)
457 mm or greater (overhanging one or both sides of platform* subject to weight
restrictions below and external support, if needed.)
Flat, tapered front-to-back, flat front with rounded edges, cube, cuboid, cylinder on
end, prism on end
Tapered bottles, boxes, packages, bags, pouches, lids (canning-jar lids, jelly-jar lids,
any flat lid), tins, bins, packages, cans, and many more.
Application Area
Height
Width
8"
Length
Advertisement
Table of Contents
