Table of Contents
Advertisement
Label and Roll Specifications
A wide variety of label stock can be used in the Applicator. Refer to the following specifications
and settings before ordering custom stock from Primera or any stock from another company.
Important! Test all custom made label stock with the intended applicator before ordering large
quantities!
Label Sensing Methods
Method 1: Label
Gap Sensing
Method 2: Reflective/Black
Mark Sensing
(Black Mark must be printed
on back side of label stock)
Note: See table below for Max and Min values in inches and millimeters.
Label Width
Liner Width
Distance from
edge of Media
Gap Between
Labels
Label Height
Black Mark
Width
AP550e Label Applicator 21
Advertisement
Table of Contents
