Configuring 3G Wan Connection; 3G Wan Connection Parameters - Zte ZXHN H108N Maintenance Management Manual

6.1.2 Configuring 3G WAN Connection

The ZXHN H108N device supports 3G WAN connection by using the 3G USB network card. This
procedure introduces how to configure the 3G WAN connection
Context
The ZXHN H108N device supports 3G WAN connection by using the 3G USB network card.
The ZXHN H108N supports eight WAN connections at most.
Steps
1. On the navigation tree, click [Network→ WAN→ 3G Connection]. The 3G WAN connection
configuration page is displayed, as shown in
Figure 7 3G WAN Connection
Table 7 describes the parameters for creating a new 3G WAN connection.
Table 7 3G WAN Connection Parameters
Parameter
Connection Name
Enable NAT
Figure 7.
Description
3G WAN connection name
When multiple computers in a
access the Internet, NAT is used to transfer the private network
address to the public network address of the WAN port.
23
LAN share one IP address to