Configuring Ipv6 Static Routing - Zte ZXHN H108N Maintenance Management Manual

Steps
1. On the navigation tree, click [Network→Routing(IPv6)→Default Gateway].
gateway page is displayed, see
Figure 31 Default Gateway
2. Select one WAN connection from the WAN Connection drop-down list as the default gateway.
3. Click Submit.

6.5.2 Configuring IPv6 Static Routing

This procedure introduces how to configure IPv6 static routing.
Prerequisite
Before configuring static routing, make sure that the IPv6 WAN connection is created.
Steps
1. On the navigation tree, click [Network→Routing(IPv6)→ Static Routing]. The IPv6 static
routing configuration page is displayed, see
Figure 32 IPv6 Static Routing
Table 22 describes the parameters for the static routing.
Figure 31.
Figure 32.
49
The default